The rmu mount for magnifiers by reptilia is a lightweight, slim-line solution manufactured at the request of a user group.The rmu mount for magnifiers lifts 3x and 6x magnifiers 0.39 in their original mounts (typically 39mm/1.54 height) to alight with a 1.93 height mounted red...
Introducing the reptilia rof-90 for acro/mps in 34mm.The rof-90 is a drop-in upgrade for the reptilia aus mount or geissele super precision 34mm magnified optic mounts.The rof-90 was adds options for close-in target engagement and passive aiming with night vision.The rof-90 for a aimpoint acro...
Introducing the reptilia rof-90 for acro/mps in 34mm.The rof-90 is a drop-in upgrade for the reptilia aus mount or geissele super precision 34mm magnified optic mounts.The rof-90 was adds options for close-in target engagement and passive aiming with night vision.The rof-90 for a aimpoint acro...
Model: ROF-90Finish: Type 3 Hard AnodizedMaterial: 7075-T6 Aluminum
Introducing the saddle mount for steiner mps & aimpoint acro optics for the beretta 1301 & a300 line of shotguns.Machined from billet 7075-t6 aluminum and finished with milspec type iii hard coat anodize, the saddle is the lowest possible mounting solution for miniature red dot...
Introducing the 1.70 inch bore height aus mount for 34mm diameter magnified optics, from reptilia.Driven by the request of an end user group, the aus mount is the culmination of a 2 year development program.Like the dot mount line the aus mount attaches to any...
Introducing the 1.70 inch bore height aus mount for 30mm diameter magnified optics, from reptilia.Driven by the request of an end user group, the aus mount is the culmination of a 2 year development program.Like the dot mount line the aus mount attaches to any...
The aus mount for 34mm diameter magnified optics, from reptilia.Like the dot mount line the aus mount attaches to any m1913 picatinny rail via the anti-snag spring-loaded nitride steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or...
The aus mount for 34mm diameter magnified optics, from reptilia.Like the dot mount line the aus mount attaches to any m1913 picatinny rail via the anti-snag spring-loaded nitride steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or...
The aus mount for 30mm diameter magnified optics, from reptilia.Like the dot mount line the aus mount attaches to any m1913 picatinny rail via the anti-snag spring-loaded nitride steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or...
Introducing the socket mount m-lok qd attachment point, from reptilia.Driven by the request of an end user group, for an anti-snag, low profile, streamline m-lok attachment.The socket mount is machined from a single piece of billet 7075-t6 aluminum and is finished with mil-std type iii,...
Introducing the socket mount m-lok qd attachment point, from reptilia.Driven by the request of an end user group, for an anti-snag, low profile, streamline m-lok attachment.The socket mount is machined from a single piece of billet 7075-t6 aluminum and is finished with mil-std type iii,...
The hostile engagement rings are fused together and created a beefy one-piece hostile engagement mount.Made from 7075-t6 aluminum and finished in matte black hardcoat, the hostile engagement mount extends the center of the forward ring 2 beyond the edge of the 1913 picatinny mounting surface.This...
The warne rimfire rings were created to fits both the 3/8th inch and 11mm dovetails found on many common rimfire rifles.Featuring a unique 70/30 horizontal split design, these steel rimfire rings are the best available.Tube Diameter: 30mmHeight: HighFinish: MatteMaterial: SteelMount Type: 3/8"/11mm Dovetail
The warne rimfire rings were created to fits both the 3/8th inch and 11mm dovetails found on many common rimfire rifles.Featuring a unique 70/30 horizontal split design, these steel rimfire rings are the best available.Tube Diameter: 30mmHeight: MediumFinish: MatteMaterial: SteelMount Type: 3/8"/11mm Dovetail
Finish: Type 3 Hard AnodizeMaterial: 6061 Aluminum
Height: 2.20"Finish: AnodizedMaterial: Aluminum w/ Steel Inserts
Model: RMRFinish: Matte AnodizedMaterial: AluminumMount Type: Legacy QD MountRing Height: Medium
Length: 6.90"Model: RMRRing Height: Ultra Low
Model: CantileverRing Height: Medium
Model: CantileverMaterial: AluminumRing Height: Medium
Model: In LineMaterial: AluminumRing Height: Medium
Model: In LineMaterial: AluminumRing Height: Low